Skip to navigation Skip to main content

+86 135 3017 0059

CUSTOM METAL SOLUTIONS

REQUEST A QUOTE
Titanium Valley logo
  • Home
  • Products
    • Titanium Foil
    • Nickel Foil
    • Zirconium Foil
    • Titanium Rod
    • Nickel Rod
    • Zirconium Rod
    • Titanium Wire
    • Nickel Wire
    • Zirconium Wire
  • News
  • About us
    • Certifications & Reports
    • Material Documentation
  • Contact us
  • FAQ
Titanium Valley logo
Grade 2 Titanium Rod
12 11 月
Blog

Grade 2 Titanium Rod: Corrosion Service and Fabrication

Posted by author-avatar Polly
2026-11-19
Grade 2 titanium rod is widely used for commercially pure titanium components. Select it using the service environment and fabrication requirements, then agree the rod dimensions, surface and acceptance documents.
#Grade 2 Titanium Rod
Continue reading
Grade 12 Titanium Rod
12 11 月
Blog

Grade 12 Titanium Rod: When to Review It Against Grade 2

Posted by author-avatar Polly
2026-11-19
Grade 12 titanium rod is a candidate for corrosion-service components when commercially pure titanium needs a closer service review. Compare it with Grade 2 using the actual fluid, temperature, fabrication and mechanical requirements.
#Grade 12 Titanium Rod
Continue reading
Grade 1 Titanium Wire
12 11 月
Blog

Titanium Grade 1 Wire: Diameter, Condition and End Use

Posted by author-avatar Polly
2026-11-19
Titanium Grade 1 wire is commercially pure titanium supplied in specified diameters, conditions and surfaces. The order should state whether the wire will be formed, woven, fabricated or used under a welding filler specification.
#Grade 1 Titanium Wire
Continue reading
Grade 1 Titanium Rod
12 11 月
Blog

Grade 1 Titanium Rod: Bending and Welding Selection

Posted by author-avatar Polly
2026-11-19
Grade 1 titanium rod is a commercially pure option for parts where forming and fabrication are central to selection. Specify the rod diameter and condition alongside the bend geometry and welding requirements.
#Grade 1 Titanium Rod
Continue reading
Beta Titanium Wire
12 11 月
Blog

Beta Titanium Wire Specifications: Alloys, Conditions and RFQ

Posted by author-avatar Polly
2026-11-19
A beta titanium wire specification should connect alloy designation, delivered condition and final processing. This page focuses on the information needed to compare quotations and define acceptance for a repeatable wire order.
#Beta Titanium Wire
Continue reading
Black Zirconium Sheet
12 11 月
Blog

Black Zirconium Sheet: Surface Finish and Ordering Guide

Posted by author-avatar Polly
2026-11-19
Black zirconium sheet combines a zirconium substrate with an oxidized surface. Specify the substrate separately from the appearance treatment and agree how the finished sheet will be formed, handled and inspected.
#Black Zirconium Sheet
Continue reading
Beta Titanium Wire
12 11 月
Blog

Beta Titanium Wire: Choosing an Alloy for the Part

Posted by author-avatar Polly
2026-11-19
Beta titanium wire covers multiple alloy systems and delivery conditions. Compare candidate alloys using the forming sequence, finished-part loading and any planned heat treatment before choosing wire for a spring or formed component.
#Beta Titanium Wire
Continue reading
Anodized Titanium Wire
12 11 月
Blog

Anodized Titanium Wire: Color Samples and Finish Acceptance

Posted by author-avatar Polly
2026-11-19
Anodized titanium wire is selected by its base alloy and oxide appearance. A useful order describes the wire dimensions, starting surface, target color and handling requirements, then uses an approved sample to define the finish.
#Anodized Titanium Wire
Continue reading
1/4 Titanium Rod
12 11 月
Blog

Quarter-Inch Titanium Rod: Tolerance and Cut-Length Checklist

Posted by author-avatar Polly
2026-11-19
1/4 titanium rod is round titanium stock with a nominal diameter of 6.35 mm. Choose the grade for the part, then specify diameter tolerance, straightness, surface and cut length so the delivered stock suits the machining or assembly operation.
#1/4 Titanium Rod
Continue reading
ASTM B348 Titanium Rod
12 11 月
Blog

ASTM B348 Titanium Rod: Specification and MTR Review

Posted by author-avatar Polly
2026-11-19
An ASTM B348 titanium rod order identifies the grade, standard edition and delivery condition together with dimensions and inspection requirements. Use the purchase order and material test report as a matched set when accepting the shipment.
#ASTM B348 Titanium Rod
Continue reading
  • ‹
  • 1
  • 2
  • 3
  • 4
  • 5
  • ›
  • »
About Us | Contact Us | Products | Blog | Supply Capabilities
Copyright © 2026 titaniumvalleys.com. All Rights Reserved
  • Titanium & Nickel Foil, Rod, Wire Manufacturer | Titanium Valley
  • Products
    • Titanium Foil
    • Nickel Foil
    • Zirconium Foil
    • Titanium Rod
    • Nickel Rod
    • Zirconium Rod
    • Titanium Wire
    • Nickel Wire
    • Zirconium Wire
  • News
  • About us
    • Certifications & Reports
    • Material Documentation
  • Contact us
  • FAQ