Why Is Gr1 Titanium Bar Suitable for Highly Corrosion-Resistant Industrial Applications?
Direct engineering answer. Gr1 Titanium Bar should be evaluated against the finished component, prod...
What Does ELI Mean in Grade 23 Titanium Foil?
ELI means extra-low interstitial. This guide explains how limits on elements such as oxygen relate to Ti-6Al-4V material behavior, and why a Grade 23 designation and an ASTM F136 purchase specification should be checked separately.
Grade 5 Titanium Foil (Ti-6Al-4V): Properties and Standards
Grade 5 titanium foil is Ti-6Al-4V for applications that need higher strength than commercially pure foil. Verify tensile requirements for the ordered thickness and condition, and confirm whether the application actually uses foil, strip or sheet.
Grade 4 Titanium Foil: Strength, Bendability and Selection
Choose Grade 4 titanium foil when a commercially pure grade needs higher strength and the part can accommodate the forming limits. Before switching from Grade 2, check bend radius, rolling direction and springback on a sample at the ordered gauge.
Titanium Alloy Foil: Grades, Properties and Selection Guide
Start with the part requirement. Compare Grade 5 for strength, Grade 9 when forming is a priority, Grade 23 when the specified ELI material requirements apply, and Ti-15-3 when a beta alloy is a candidate for a spring or formed part.
Titanium Aluminum Vanadium Foil: Grades 5, 9 and 23 Compared
Titanium aluminum vanadium foil includes several alloy grades. Compare Ti-6Al-4V (Grade 5), Ti-3Al-2.5V (Grade 9), and the Ti-6Al-4V ELI family by chemistry, forming needs and purchase specification.
Grade 9 Titanium Foil: Composition, ASTM B265 and Ordering
Specify Grade 9 titanium foil by Ti-3Al-2.5V designation, governing standard and edition, gauge, width, delivery condition, and inspection requirements. Use the chemistry table to review the mill test report against the purchase specification.
Pure Titanium Foil: Grade 1 vs Grade 2 vs Grade 4
Compare three commercially pure foil grades: Grade 1 when forming takes priority, Grade 2 when the part needs a balance of strength and formability, and Grade 4 when higher strength matters. Check the ordered gauge and condition before applying any table value.
Grade 9 Titanium Foil (Ti-3Al-2.5V): Properties and Formability
Grade 9 titanium foil is a Ti-3Al-2.5V option when a part needs an alloy grade and forming remains a priority. Compare the ordered condition and gauge against Grade 5, and use trial bends or stampings to qualify the process.
Grade 23 Titanium Foil (Ti-6Al-4V ELI): Properties and Uses
Grade 23 titanium foil belongs to the Ti-6Al-4V ELI family. Compare ASTM B265 Grade 23 (UNS R56407) and ASTM F136 (UNS R56401) by edition, product form and delivery condition before using a mechanical value in a specification.









