Titanium Aluminum Vanadium Wire: Grades 5, 9 and 23 Compared
- Titanium/Aluminum/Vanadium Wire

Titanium aluminum vanadium wire includes Ti-6Al-4V, Ti-3Al-2.5V and the Ti-6Al-4V ELI family. These names describe different specifications and selection questions that should be resolved before ordering wire.
1. Selection and Acceptance Decisions
- Compare the exact chemistry and delivery condition when choosing between Grade 5 and Grade 9 for a formed part.
- For ELI material, identify the required product standard and acceptance criteria rather than treating the ELI label as a complete medical specification.
- Keep alloy identity separate from filler classification when the wire is intended for welding.
Send a specification for this material with the grade, dimensions, quantity, intended use and the acceptance details listed above. Ask for confirmation of the quoted size, condition and documentation.
2. The Family Compositions
Alloy | Al (%) | V (%) | Fe (max) | O (max) | UNS |
Ti-6Al-4V (Gr5) | 5.50–6.75 | 3.50–4.50 | 0.40 | 0.20 | R56400 |
Ti-6Al-4V ELI (Gr23) | 5.50–6.50 | 3.50–4.50 | 0.25 | 0.13 | R56401 |
Ti-3Al-2.5V (Gr9) | 2.50–3.50 | 2.00–3.00 | 0.25 | 0.12 | R56320 |
Table 1 — Ti-Al-V wire composition limits (ASTM B863 / AMS practice; confirm against the contracted edition).
3. Properties and Filler Designations
Alloy | Tensile (min) | Elongation (min) | AWS A5.16 filler |
Grade 5 | ≥ 895 MPa | 10% | ERTi-5 |
Grade 9 | ≥ 620 MPa | 15% | ERTi-9 |
Grade 23 ELI | ≥ 860 MPa (F136) | 10% | ERTi-23 (ELI) |
Table 2 — Annealed minimums and the matching welding filler for each alloy.
4. Why the Family Dominates Alloy Wire
The Ti-Al-V system delivers the two-to-threefold strength of alloy titanium while keeping the density near pure titanium’s 4.5 g/cm³. Grade 5 wire feeds aerospace fasteners and springs; Grade 9 adds cold formability for spring winding and marine hardware; Grade 23 ELI trades ~4% of tensile for fracture toughness, fatigue and weld ductility — the implant and fracture-critical grade.
5. How to Specify Ti-Al-V Wire
Five fields remove every ambiguity: alloy (Ti-6Al-4V), grade (Grade 5), UNS (R56400), standard + edition (ASTM B863-xx or AWS A5.16 for filler), and diameter/tolerance/condition. Custom size, condition, tolerance and documentation can be reviewed to the purchase specification.
FAQ
(1) Is titanium/aluminum/vanadium wire the same as Ti-6Al-4V wire?
Usually, but the family also includes Ti-6Al-4V ELI (Grade 23) and Ti-3Al-2.5V (Grade 9). If the grade is not named, assume Ti-6Al-4V and confirm before quoting.
(2) What is the welding filler for Ti-Al-V alloys?
ERTi-5 for Grade 5, ERTi-9 for Grade 9 and ERTi-23 for ELI fabrications, all per AWS A5.16, with hydrogen capped at 0.015% and oxygen limits matched to the base metal.
(3) Why is Grade 23 preferred for implants?
Its extra-low interstitial chemistry (O ≤ 0.13%, Fe ≤ 0.25%) buys fatigue life, fracture toughness and biocompatibility — the ASTM F136 / ISO 5832-3 regime.
(4) Can Ti-Al-V wire be cold worked?
Grade 9 cold-works readily; Grade 5 tolerates limited cold work before intermediate annealing; both reach higher strength in cold-worked condition at reduced elongation.
(5) Which standard covers Ti-Al-V wire?
ASTM B863 for wire, AWS A5.16 for filler, AMS 4955 for aerospace Ti-6Al-4V filler practice, and ASTM F136 for Grade 23 implant wire.
Related Resources and Inquiry
See the titanium wire category or send your specification.
Baoji Titanium Valley Titanium Nickel Zirconium Material Processing Co., Ltd. produces titanium wire and welding wire per ASTM B863 / AWS A5.16 from a dedicated drawing line, from fine wire to welding filler on spools, under ISO 9001 / ISO 13485. Send your specification to sales@titaniumvalleys.com — Custom size, condition, tolerance and documentation can be reviewed to the purchase specification.
6. Related Reading
- Titanium Alloy Wire: Grades by Forming and End Use
- Titanium Weld Wire: Filler Selection and Procedure Review
References
1. ASTM B863, Standard Specification for Titanium and Titanium Alloy Wire.
2. AWS A5.16/A5.16M, Specification for Titanium and Titanium Alloy Welding Electrodes and Rods.
3. ASTM E8/E8M, Standard Test Methods for Tension Testing of Metallic Materials.
4. SAE AMS 4955, Titanium Alloy Welding Wire, 6Al-4V.
5. ASTM F136, Standard Specification for Wrought Titanium-6Aluminum-4Vanadium ELI Alloy for Surgical Implant Applications.
This article is a technical reference. It does not constitute a commercial offer; dimensions, tolerances and documentation are confirmed at order review.
Published by: Titanium Valley Technical Team. Technical and quality review: pending.