Pure Zirconium Plate: Chemistry and Purchase Acceptance
- Pure Zirconium Plate

Pure zirconium plate orders need a verifiable material identity as well as dimensions. This guide focuses on how the specified grade, chemistry report, condition and shipment identification support acceptance of commercially pure plate.
1. Selection and Acceptance Decisions
- Check that the quoted material designation is the one required by the drawing and purchase specification.
- Match material marking to the heat report and record the applicable edition and product form.
- Define any added inspection, surface or fabrication requirements on the purchase order instead of assuming they follow from pure zirconium.
Send a specification for this material with the grade, dimensions, quantity, intended use and the acceptance details listed above. Ask for confirmation of the quoted size, condition and documentation.
2. The Grade and Its Numbers
Property | Value |
Zr + Hf | ≥ 99.2% (Hf ≤ 4.5%) |
Tensile strength (min, annealed) | ≥ 379 MPa (55 ksi) |
Yield strength (min) | ≥ 207 MPa (30 ksi) |
Elongation (min) | 16% |
Density | 6.51 g/cm³ |
Melting point | ≈ 1852℃ |
Table 1 — Zr702 plate properties per ASTM B551 (annealed).
3. Where the Plate Earns Its Price
Zirconium plate pays off where the medium is a non-fluoride reducing acid — hydrochloric in synthesis and pickling systems, dilute-to-mid sulfuric, organic and mixed acids — and where a liner or coating would be the failure point. The ZrO₂ film is self-healing and stable across wide concentration-temperature windows in these media, so equipment keeps working without coating maintenance. The exclusions: hydrofluoric and fluoride media, and strongly oxidizing acidic mixtures, which need case-by-case evaluation.
4. Fabrication Discipline
Zr702 plate welds with TIG or electron-beam under full inert-gas shielding. The rules that make or break a zirconium vessel: clean joints (no chlorinated solvents), back purging, hydrogen control, and stress relief on heavy sections. Machining follows titanium practice — low thermal conductivity, sharp tools, generous coolant.
Ordering Checklist
- Grade + UNS (Zr702 / R60702);
- Thickness with tolerance band, width, length — plate is thick-band product per B551;
- Surface (pickled, or machined) and flatness class;
- Condition — annealed;
- Standard + edition (B551, ASME SB-551 practice for pressure equipment);
- Documentation — MTR per plate, UT report for heavy gauges, EN 10204 3.1/3.2 class.
FAQ
(1) Is pure zirconium plate suitable for pressure vessels?
Yes — Zr702 plate is standard for acid-service pressure equipment, ordered with ASME SB-551 practice documentation and fabricated with qualified zirconium welding procedures.
(2) How does Zr702 plate compare with Zr705 plate?
Zr705 (Zr-2.5Nb) is about 45% stronger (≥ 552 MPa vs ≥ 379 MPa) for stressed or higher-temperature parts; Zr702 is the standard choice where corrosion, not strength, decides.
(3) Can Zr702 plate be welded in the field?
Yes, with TIG and the same shielding discipline as shop welding — cleanliness, back purge and hydrogen control.
(4) What attacks pure zirconium plate?
Hydrofluoric acid and fluoride media attack it readily; strongly oxidizing acidic mixtures need evaluation. In its window — reducing acids — it outlasts titanium and stainless steel.
(5) Which documentation should I require?
MTR per plate with full chemistry including O/N/H, tensile for the gauge, condition, standard edition, plus UT report and third-party verification where the vessel code requires. Custom size, condition, tolerance and documentation can be reviewed to the purchase specification.
Related Resources and Inquiry
See the zirconium plate category or send your specification.
Baoji Titanium Valley Titanium Nickel Zirconium Material Processing Co., Ltd. produces zirconium foil, strip, sheet and plate per ASTM B551/B551M (R60702 / R60705) from vacuum-melted ingots on a 750 mm 20-high precision rolling line under ISO 9001 / ISO 13485. Send your specification to sales@titaniumvalleys.com — Custom size, condition, tolerance and documentation can be reviewed to the purchase specification.
5. Related Reading
- Zirconium 702 Plate: Service Review and Fabrication
- Zirconium 705 Plate: Comparing Strength and Fabrication Needs
References
1. ASTM B551/B551M, Standard Specification for Zirconium and Zirconium Alloy Strip, Sheet, and Plate.
2. ASTM E8/E8M, Standard Test Methods for Tension Testing of Metallic Materials.
3. EN 10204, Metallic Products — Types of Inspection Documents.
This article is a technical reference. It does not constitute a commercial offer; dimensions, tolerances and documentation are confirmed at order review.
Published by: Titanium Valley Technical Team. Technical and quality review: pending.