Grade 4 Titanium Rod: Strength and Forming Trade-Offs

Grade 4 Titanium Rod

Grade 4 titanium rod offers a higher-strength commercially pure option. Review it against Grade 2 using the finished part geometry, forming steps and machining requirements before fixing the purchase specification.

1. Selection and Acceptance Decisions

  • Trial bends in the delivered condition and document tooling, radius and acceptable surface condition.
  • Check machining allowance and final dimensions together with the required strength and elongation.
  • For repeat orders, agree which batch results will be compared and how a change of process or condition will be communicated.

Send a specification for this material with the grade, dimensions, quantity, intended use and the acceptance details listed above. Ask for confirmation of the quoted size, condition and documentation.

2. Chemical Composition

Element (max %)

Grade 4 limit

Nitrogen (N)

0.05

Carbon (C)

0.10

Hydrogen (H)

0.015

Iron (Fe)

0.50

Oxygen (O)

0.40

Titanium (Ti)

Balance (typically ≥ 99%)

Table 1 — ASTM B348 Grade 4 composition limits (tighter N ≤ 0.03% / C ≤ 0.08% available by agreement).

3. Mechanical Properties and the Oxygen Ladder

Property

Grade 1

Grade 2

Grade 4

Oxygen (max)

0.18%

0.25%

0.40%

Tensile (min)

≥ 240 MPa

≥ 345 MPa

≥ 550 MPa

Yield (min)

170–310 MPa

≥ 275 MPa

≥ 483 MPa

Elongation (min)

24%

20%

15%

Table 2 — The CP strength ladder: oxygen is the strength dial.

Applications

  • Aerospace — brackets, mounts and sensor bases per AMS 4921, where CP weldability meets strength needs;
  • Medical — fixation hardware and dental implant stock per ASTM F67 / ISO 5832-2 / GB/T 13810;
  • Food and pharmaceutical — mixer and pump shafts in hygienic, corrosive service;
  • Chemical and marine — higher-strength CP parts where Grade 2 would need a larger section;
  • Precision instruments — non-magnetic, dimensionally stable structural parts.

4. Bulk Procurement Discipline

For volume buyers the decisive questions are batch stability and documentation. Ask for three to five historical MTCs and look at the spread of tensile, yield and elongation — wide scatter means weak process control upstream. Confirm the production chain (VAR twice or more → forging → rolling/drawing → vacuum or inert annealing → straightening → peeling/grinding → NDT where agreed), verify MTC authenticity (heat number, third-party reports where required), and fix MOQ and lead time for custom sizes before committing the production plan. Custom size, condition, tolerance and documentation can be reviewed to the purchase specification.

FAQ

(1) What is the difference between Grade 4 and Grade 2 rod?

Grade 4 raises oxygen to 0.40% (from 0.25%) and tensile minimum to ≥ 550 MPa (from ≥ 345 MPa) — about 59% stronger — while elongation drops to ≥ 15%. Choose Grade 2 for general corrosion service, Grade 4 where the section must carry load.

(2) Is Grade 4 rod weldable?

Yes — CP alpha structure welds cleanly with TIG under shielding; the higher oxygen slightly reduces weld ductility versus Grade 2, which matters in highly stressed joints.

(3) Is Grade 4 an implant grade?

Grade 4 is a standard implant material when ordered to ASTM F67 / ISO 5832-2 — it is the strongest unalloyed titanium implant grade and is widely used for fixation hardware and dental components.

(4) Which AMS specification covers Grade 4 rod?

AMS 4921 covers commercially pure titanium bar/wire/forgings at the 483 MPa (70 ksi) yield level — the aerospace-grade Grade 4 practice.

(5) How do I verify batch stability from a supplier?

Request 3–5 historical MTCs, compare tensile/yield/elongation spreads across heats, and confirm the melt count and annealing route; wide scatter is a red flag. Custom size, condition, tolerance and documentation can be reviewed to the purchase specification.

Related Resources and Inquiry

See the Grade 4 titanium rod product page and the titanium rod category, or send your specification.

Baoji Titanium Valley Titanium Nickel Zirconium Material Processing Co., Ltd. produces titanium rod and barstock from VAR-melted ingots on a rolling line rated over 20, 000 t/yr, per ASTM B348 / GB/T 2965, with cold-drawn, hot-rolled and forged routes. Send your specification to sales@titaniumvalleys.com — Custom size, condition, tolerance and documentation can be reviewed to the purchase specification.

5. Related Reading

References

1. ASTM B348/B348M, Standard Specification for Titanium and Titanium Alloy Bars and Billets.

2. SAE AMS 4921, Titanium Bars, Wire, Forgings and Rings, Commercially Pure, Annealed, 70 ksi (483 MPa).

3. ASTM F67, Standard Specification for Unalloyed Titanium, for Surgical Implant Applications.

4. ISO 5832-2, Implants for Surgery — Metallic Materials — Unalloyed Titanium.

5. ASTM E8/E8M, Standard Test Methods for Tension Testing of Metallic Materials.

6. GB/T 2965, Titanium and Titanium Alloy Bars.

This article is a technical reference. It does not constitute a commercial offer; dimensions, tolerances and documentation are confirmed at order review.

Published by: Titanium Valley Technical Team. Technical and quality review: pending.