All Product
Slide to learn more
Gr4 Titanium Rod
Gr4 titanium rods are high-purity, α-type single-phase titanium rods without alloying elements. They are the strongest grade of industrial pure titanium, specifically designed for structural components and corrosion-resistant parts in industrial settings, and are distinct from medical-grade titanium, which features ultra-low clearance control.
Gr4 Titanium Wire
Gr4 titanium wire (ASTM Grade 4/UNS R50700/TA4) is the highest-strength CP titanium grade. α single-phase structure, non-heat-treatable. UTS≥550 MPa and YS≥483 MPa — significantly higher than Gr1 and Gr2. Combines good ductility with excellent weldability and the same corrosion resistance as other CP titanium grades.
Gr5 ELI Titanium Wire
Gr5 ELI titanium wire (ASTM Gr5 ELI / UNS R56401) is the extra-low-interstitial version of Ti-6Al-4V, an α+β titanium alloy. Tight control of interstitial elements — oxygen, iron, and carbon — delivers fracture toughness and cryogenic ductility superior to standard Gr5, while retaining its full strength. The material resists brittle failure at cryogenic temperatures, offers excellent fatigue performance, and meets ASTM F136 and ISO 5832-3 biocompatibility requirements. Available from φ0.1 mm to φ6.5 mm, customizable up to φ10.0 mm, as straight wire or coil.
Gr5 Titanium Foil
Gr5 titanium foil is a high-performance ultra-thin titanium strip/foil based on Ti‑6Al‑4V (an α+β two-phase titanium alloy), manufactured through multi-pass precision cold rolling and vacuum annealing. Compared with commercially pure titanium (Gr1/Gr2/Gr4), Gr5 not only has significant higher strength, but also maintains excellent stability under moderate to high temperatures, making it a typical representative of lightweight high-strength structural materials.
Gr5 Titanium Rod
Gr5 titanium rod is an α+β type titanium alloy rod conforming to the American standard ASTM B348 grade 5 (Ti 6Al 4V), manufactured according to general industrial standards and used in industrial applications.
Gr5 Titanium Wire
Gr5 titanium wire is an α+β titanium alloy with the nominal composition Ti-6Al-4V. It accounts for over 50% of global titanium consumption-more than any other titanium grade.
Ni200 Nickel Wire
Ni200 nickel wire (UNS N02200) is a commercially pure nickel material with ≥99.0% nickel (plus cobalt) content and a face-centered cubic (FCC) crystal structure. It delivers outstanding corrosion resistance in alkaline media and neutral salt solutions, dramatically outperforming stainless steel in caustic alkali service. The material also features good electrical conductivity, thermal conductivity, and formability. Ni200 is widely used in chlor-alkali processing, food processing equipment, electronic components, and synthetic fiber production. Available from φ0.1 mm to φ6.5 mm, customizable up to φ10.0 mm, as straight wire or coil.
Ni200 Rod
The industrial-grade Ni200 rod is a nickel-based alloy bar widely used in chemical, energy, marine, and electronic applications. Production processes include hot rolling, hot forging, cold drawing, and bright turning. Hot-worked(R), annealed(M), and cold-worked(Y) states are the supply states.
Nickel 200 Foil
Nickel 200 Foil (Ni200/UNS N02200) is an ultra-thin nickel strip produced through multi-pass precision rolling from high-purity industrial nickel (Ni ≥ 99.6%–99.9%). As a commercially pure nickel material, it combines excellent electrical conductivity with strong corrosion resistance and stable processing performance.