Where Can You Buy High-Quality Gr2 Titanium Foil?

Gr2 Titanium Foil

Direct engineering answer. Gr2 titanium foil should be evaluated against the finished component, product form, governing specification, downstream process and acceptance evidence. A general property value is an orientation tool; the released drawing, current certificate and inspection plan control the final decision.

Direct engineering answer. Gr2 titanium foil should be evaluated against the finished component, product form, governing specification, downstream process and acceptance evidence. A general property value is an orientation tool; the released drawing, current certificate and inspection plan control the final decision.

Gr2 (Grade 2) commercially pure titanium foil is widely used in chemical, aerospace, new energy, and other industries. Buyers typically encounter two types of questions during material selection: first, whether the property differences between Gr1 and Gr2 are significant enough to affect grade selection; and second, how to determine whether the dimensional accuracy, surface condition, and batch consistency data provided by a supplier are reliable. This article addresses these questions from four perspectives—material properties, quality evaluation, typical applications, and supplier screening—for the reference of technical selection and procurement. It does not recommend any single supplier; specific equipment data and capacity information should be provided by the supplier as verifiable documentation at the time of inquiry.

1. The Difference Between Gr2 and Gr1 Titanium Foil

(1) Basic Characteristics of Gr2 Titanium Foil

The titanium content of Gr2 commercially pure titanium is generally no less than 99.2% (by mass). It is usually supplied in the form of cold-rolled thin strip or foil, with a typical thickness range of about 0.02–1.0 mm. For thinner gauges, such as the 0.005 mm level, dedicated rolling, slitting, and inspection processes are required, and such products are non-standard custom items; acceptance conditions such as pinhole rate, thickness tolerance, and surface defects should be clearly defined before purchase. The main characteristic of Gr2 is that it provides higher strength than Gr1 while maintaining good ductility, making it suitable for general corrosion-resistant structural parts and precision components requiring both strength and plasticity.

(2) Key Property Comparison Between Gr2 and Gr1

Both Gr1 and Gr2 are commercially pure titanium, but they differ in strength, yield, and ductility. The table below lists typical values or ranges based on common international material specifications; actual products should be confirmed against the corresponding material test certificate.

Comparison Item

Gr1 Titanium Foil

Gr2 Titanium Foil

Minimum tensile strength

≥240 MPa

≥345 MPa

Yield strength range

Approx. 138–310 MPa

Approx. 275–450 MPa

Minimum elongation

≥24%

≥20%

Corrosion resistance

Excellent in oxidizing and chlorine-containing environments

Comparable to Gr1

Typical applications

Deep drawing, ultra-thin-wall parts, high-ductility applications

General structural parts, general corrosion-resistant applications requiring strength

The data in the table are for grade comparison; values may vary slightly under different standards or product thicknesses. When purchasing, the referenced standard should be clearly specified, such as ASTM B265, JIS H4600, or EN 10095, and the supplier should be required to provide test data for the corresponding batch.

(3) Physical Property Reference

Physical Property

Typical Value or Description

Density

Approx. 4.51 g/cm³

Melting point

Approx. 1668℃

Continuous service temperature

Generally not exceeding 350℃

Short-term service temperature

Approx. 540℃

Electrical resistivity

Approx. 55 μΩ·cm, also written as 0.55 μΩ·m

Minimum tensile strength

≥345 MPa (Gr2)

The values above are typical at room temperature; parameters such as electrical resistivity are affected by impurity content, temperature, and heat treatment condition. Pure titanium has lower electrical and thermal conductivity than materials such as copper and aluminum, which is one reason it is not the first choice in applications requiring high electrical conductivity, such as electromagnetic shielding.

2. Core Criteria for Evaluating High-Quality Gr2 Titanium Foil

(1) Thickness Tolerance and Flatness

Flatness and thickness uniformity of ultra-thin foil directly affect downstream stamping, welding, and lamination processes. For conventional precision foil, thickness tolerance is usually expressed as an absolute value in microns or as a percentage of nominal thickness. Some production lines can achieve ±0.001 mm within specific thickness ranges and narrow widths, but tolerance may be relaxed for thinner or wider gauges. Flatness control depends on the matching of multiple parameters such as the mill roll system, rolling force, tension, cooling, and speed; therefore, product precision cannot be judged solely on the rated rolling force or maximum speed of a given mill. When purchasing, buyers should require the supplier to provide measured tolerance ranges and flatness data corresponding to the target thickness and width.

(2) Surface Condition and Cleanliness

The surface condition of titanium foil affects welding, coating adhesion, and composite layer bonding. Common treatments include ultrasonic cleaning, degreasing, bright annealing, and dedicated temper/skin-pass rolling. For ultra-thin foil, ordinary grinding processes should not simply be used, because grinding may cause thickness loss, scratches, localized heating, and flatness changes. More commonly, surface roughness and color are controlled through bright annealing, stress-relief annealing, temper rolling, or dedicated surface treatment.

Surface wetting tension can serve as a reference indicator of cleanliness, with units commonly written as dyne/cm or mN/m. However, this indicator is mostly used to evaluate surface wettability and residual oil contamination; whether it is used as an acceptance indicator for titanium foil should be determined in combination with downstream coating, lamination, or welding processes, and the same value should not be applied to all applications. Surface color uniformity can help assess the consistency of pickling, annealing atmosphere, and surface treatment, but it cannot alone indicate overall quality; it should be evaluated in combination with thickness, mechanical properties, and surface defect inspection.

(3) Annealing Process and Microstructural Uniformity

Cold-rolled titanium foil generally requires annealing to reduce residual stress, improve elongation, and stabilize the microstructure. For Gr2 pure titanium, the typical annealing temperature range is about 550–700℃, and the specific temperature should be determined based on target hardness, grain size, and mechanical properties. The beta transus temperature of pure titanium is about 882℃, so heat treatment of Gr2 foil generally does not approach a high temperature of about 1100℃; the maximum rated operating temperature of the equipment is only an equipment capability and does not represent the actual process window for this grade. The temperature uniformity of the annealing furnace should specify the measurement location and the length of the soaking zone or furnace zone. Common continuous annealing furnaces can achieve temperature control accuracy on the order of ±2℃ to ±5℃ at the set process temperature, but actual uniformity is affected by strip speed, width, thickness, and furnace atmosphere. When purchasing, buyers should focus on whether the supplier can provide batch mechanical property statistics rather than only equipment nameplate values.

3. Main Application Scenarios and Material Selection Logic

(1) Chemical Corrosion Protection and Marine Engineering

Gr2 titanium foil can form a dense TiO₂ passive film in seawater and chlorine-containing environments, and its pitting resistance is generally superior to that of most stainless steels. It also has good corrosion resistance in oxidizing acids such as nitric acid. However, in reducing acids such as dilute hydrochloric acid and dilute sulfuric acid, pure titanium has poor corrosion resistance and is not suitable as a general acid-resistant material without verification. Typical foil applications in chemical corrosion protection include electrolytic cell linings, vessel linings, plate heat exchanger plates, clad plates, or local patching liners. If a titanium foil lining structure is used, the number of lining seams should be reduced through rational layout and connection design; however, a reduced number of welds does not automatically eliminate corrosion risk, and evaluation must still consider the medium, temperature, and weld quality.

(2) Aerospace and Precision Structural Components

Titanium foil has a density about 60% of steel, giving it value in weight-sensitive components. Aerospace-grade thin-walled parts have high requirements for thickness deviation within the same sheet, surface defects, and batch consistency. The skin-pass/temper process improves flatness and reduces residual stress through low-reduction bending-straightening; its effect depends on the matching of equipment capability, tension, and leveling parameters with the product specification. Line speed is only one parameter in the process window and cannot independently guarantee “stable forming.” Aerospace users are advised to require suppliers to provide batch mechanical property statistics and surface defect inspection data for products of the same specification.

(3) New Energy and Electronics Industries

In applications such as electrolytic hydrogen production and fuel cell bipolar plates, titanium foil can serve as a base material resistant to electrochemical corrosion. Pure titanium has low electrical conductivity, so Gr2 titanium foil is not suitable as the primary material for high-efficiency electromagnetic shielding. For corrosion-resistant metal foil requiring a certain width and surface cleanliness in the electronics industry, a 680 mm width can satisfy some medium-width applications; wider gauges should be confirmed with suppliers that have the corresponding production lines. Wide foil helps reduce seams, but shielding or conductive performance is mainly determined by material electrical conductivity, thickness, and structural design, and cannot be judged by width alone.

4. How to Select a Reliable Gr2 Titanium Foil Supplier

(1) Key Processes and Technical Capability

Precision titanium foil manufacturing typically requires key processes such as cold rolling, annealing, cleaning, skin-pass/temper rolling, and slitting. Whether a company has a melting capability does not directly determine whether it can produce high-quality foil. Many precision foil processors use purchased hot-rolled or cold-rolled mother coils as their primary feedstock, and their core competitiveness lies in rolling, annealing, and surface control. If a supplier also has melting capability, it may have advantages in mother coil quality and full-process traceability, but this is not a necessary condition. Equipment capability values such as rolling force and rolling speed should be understood within the process window of the specific product. Different thicknesses, widths, and alloy conditions correspond to different rolling strategies and process limitations; product precision and batch consistency cannot be judged on maximum rolling force or maximum speed alone. When purchasing, buyers should require the supplier to explain how its equipment capability matches the target specification and, where possible, obtain actual production data for similar products.

(2) Standards, Certification, and Testing Systems

A reliable Gr2 titanium foil supplier can typically provide products per international standards such as ASTM B265, JIS H4600, and EN 10095, with relatively complete quality documentation. When purchasing, buyers should check whether the material test certificate includes chemical composition, mechanical properties, thickness tolerance, surface condition, annealing condition, and traceability information. For fields with high traceability requirements, such as aerospace and medical, buyers should also confirm whether the supplier has an appropriate quality management system and third-party testing capability.

(3) Custom Processing and Delivery Conditions

Requirements for specification, surface, and delivery condition vary considerably across applications. Foil of 0.02–1.0 mm is usually delivered in the annealed or cold-worked condition, subject to the technical agreement between supplier and buyer. The so-called “hot-worked” condition is generally not common for such ultra-thin foil. Surface options include bright, mirror, and matte (sand-blasted) finishes; different surfaces correspond to different process routes and costs and should be selected according to downstream processing requirements. If a supplier can provide one-stop custom services, this does help reduce communication links, but the buyer must still independently verify quality data and should not equate “custom capability” with “consistent quality.”

5. Conclusion

Selecting high-quality Gr2 titanium foil is essentially about selecting controllable thickness tolerance, stable microstructural properties, an appropriate surface condition, and traceable quality documentation. Buyers are advised, during inquiry and technical communication, to require suppliers to provide measured data corresponding to the target specification, batch statistics for the same grade and specification, and sample material test certificates, rather than making decisions based solely on promotional parameters or a single equipment capability value. Only by combining material properties with actual service conditions and acceptance standards can more robust material selection and procurement decisions be made.

FAQ

(1) Q1: What is the minimum custom thickness for Gr2 titanium foil?

The conventional thickness range for Gr2 titanium foil is about 0.02–1.0 mm. For special applications such as microelectronics and optics, some suppliers may offer ultra-thin custom products at the 0.005 mm level, but such products are not regular stock items and generally require dedicated process and quality agreements. Before purchasing, acceptance conditions such as pinhole rate, surface defects, thickness tolerance, and slitting width should be clearly defined.

(2) Q2: Is Gr2 titanium foil suitable for strongly acidic or alkaline corrosive environments?

Gr2 titanium foil generally has good corrosion resistance in seawater, chlorine-containing media, and oxidizing acids such as nitric acid. However, in reducing acids such as dilute hydrochloric acid and dilute sulfuric acid, pure titanium has poor corrosion resistance, and use in strongly reducing acid environments is not recommended without adequate corrosion testing. Alkaline environments must also be evaluated on a case-by-case basis considering temperature, concentration, and impurities.

(3) Q3: How can you determine whether a Gr2 titanium foil supplier is reliable?

Focus on verifying its capability in key processes such as cold rolling, annealing, cleaning, skin-pass/temper rolling, and slitting; whether it can provide traceable material test certificates and third-party inspection reports per international standards such as ASTM B265; and whether it can provide actual delivery data for similar products at the required thickness, width, and flatness. Batch consistency should be assessed in combination with process capability indices, historical batch data, and the operation of the quality system, and should not be judged on production capacity alone.

Contact Us

Looking for a high-quality Gr2 titanium foil (Grade 2 commercially pure titanium foil, UNS R50400) supplier or processing service provider? As a professional titanium materials company with full-process capability from cold rolling, annealing, cleaning, and skin-pass/temper rolling through precision slitting, we can supply per ASTM B265, JIS H4600, EN 10095, GB/T 3621, and other standards, with conventional thicknesses of 0.02–1.0 mm and widths covering 350–670 mm (wider gauges subject to production line capability confirmation), available in annealed or cold-worked conditions, and offering surface treatments such as bright, mirror, and matte finishes. For specific thickness ranges and narrow widths, thickness tolerance can be controlled to the order of ±0.001 mm; 0.005 mm-level ultra-thin custom products can be evaluated under dedicated process and quality agreements. We can provide measured thickness tolerance and flatness data corresponding to the target thickness and width, batch mechanical property statistics, material test certificates (including chemical composition, mechanical properties, thickness tolerance, surface condition, annealing condition, and traceability information), and third-party inspection reports. For chemical corrosion protection, aerospace, and electrolytic hydrogen production scenarios, we can assist with material selection and acceptance standard recommendations. Please contact: sales@titaniumvalleys.com

References

  1. Wang Xiangdong, Zhou Lian. Titanium Materials and Their Applications[M]. Beijing: Chemical Industry Press, 2008.
  2. Zhang Xiyan, Zhao Yongqing, Bai Chenguang. Titanium Alloys and Their Applications[M]. Beijing: Chemical Industry Press, 2005.
  3. Zhao Yongqing, Zhou Lian. Research and development status of titanium alloys[J]. Titanium Industry Progress, 2005, 22(4): 1-6.
  4. Standardization Administration of China. GB/T 3620.1—2016 Designation and chemical composition of titanium and titanium alloys[S]. Beijing: China Standards Press, 2016.
  5. Standardization Administration of China. GB/T 3621—2007 Titanium and titanium alloy sheets and plates[S]. Beijing: China Standards Press, 2007.

Engineering specification and verification framework

For Gr2 titanium foil, state grade, ordered product form, condition, nominal dimensions, tolerances, surface requirement, quantity and documentation in one controlled RFQ. The applicable product-form reference is ASTM B265, subject to the current edition and project-specific requirements. When tensile evidence is required, define the test method and sampling basis; ASTM E8/E8M or ISO 6892-1 may apply where consistent with the order.

RFQ fieldRequired detailReason
Material identityGrade, form, ASTM B265, conditionPrevents unintended substitution.
GeometryNominal size, tolerance, length or coil formDefines production and inspection scope.
Process contextForming, machining, joining, etching or assemblyRelates supply condition to actual manufacture.
VerificationCertificate, dimensional checks, lot identityCreates a traceable acceptance plan.

Risk review and incoming control

Common avoidable risks include tolerance stack-up, unclear condition, surface damage, undocumented substitution and loss of lot identity after cutting. At receipt, reconcile the purchase order, packing label and certificate before release to production. Define any supplementary testing, sampling and report format before quotation rather than after shipment.

Technical FAQ

Can catalogue values approve the material?

No. Final approval must use the ordered form, condition, standard, drawing, process route and service boundary.

What should an RFQ include?

Provide the drawing where available, grade and standard, dimensions, tolerance, condition, quantity, process context, service information and documentation requirement.

Product resources and technical quotation

Review the relevant titanium foil product category. For a drawing-based review, request a technical quotation with the full specification.

References and use note

  1. ASTM B265, applicable edition, for the ordered product form.
  2. ASTM E8/E8M or ISO 6892-1 where the project specifies tensile verification.
  3. Project drawing, purchase specification, certificate and agreed inspection plan.

This engineering note supports procurement specification. It does not replace component design validation or the governing contractual standard.

Engineering specification and verification framework

For Gr2 titanium foil, state grade, ordered product form, condition, nominal dimensions, tolerances, surface requirement, quantity and documentation in one controlled RFQ. The applicable product-form reference is ASTM B265, subject to the current edition and project-specific requirements. When tensile evidence is required, define the test method and sampling basis; ASTM E8/E8M or ISO 6892-1 may apply where consistent with the order.

RFQ fieldRequired detailReason
Material identityGrade, form, ASTM B265, conditionPrevents unintended substitution.
GeometryNominal size, tolerance, length or coil formDefines production and inspection scope.
Process contextForming, machining, joining, etching or assemblyRelates supply condition to actual manufacture.
VerificationCertificate, dimensional checks, lot identityCreates a traceable acceptance plan.

Risk review and incoming control

Common avoidable risks include tolerance stack-up, unclear condition, surface damage, undocumented substitution and loss of lot identity after cutting. At receipt, reconcile the purchase order, packing label and certificate before release to production. Define any supplementary testing, sampling and report format before quotation rather than after shipment.

Technical FAQ

Can catalogue values approve the material?

No. Final approval must use the ordered form, condition, standard, drawing, process route and service boundary.

What should an RFQ include?

Provide the drawing where available, grade and standard, dimensions, tolerance, condition, quantity, process context, service information and documentation requirement.

Product resources and technical quotation

Review the relevant titanium foil product category. For a drawing-based review, request a technical quotation with the full specification.

References and use note

  1. ASTM B265, applicable edition, for the ordered product form.
  2. ASTM E8/E8M or ISO 6892-1 where the project specifies tensile verification.
  3. Project drawing, purchase specification, certificate and agreed inspection plan.

This engineering note supports procurement specification. It does not replace component design validation or the governing contractual standard.