Zirconium 705 Plate: Comparing Strength and Fabrication Needs
- Zirconium 705 Plate

Zirconium 705 plate is a zirconium-niobium material option to review against Zr702 when the design needs a different strength level. Compare the actual specification, condition, section size and service requirements together.
1. Selection and Acceptance Decisions
- Use the mechanical requirements for the ordered product form and condition when comparing Zr705 with Zr702.
- Review the proposed welding and subsequent processing with the fabricator before final material selection.
- State plate dimensions, inspection and service requirements on the RFQ and confirm the offered plate capability explicitly.
Send a specification for this material with the grade, dimensions, quantity, intended use and the acceptance details listed above. Ask for confirmation of the quoted size, condition and documentation.
2. Chemical Composition
Element | Content (%) |
Niobium (Nb) | 2.0–3.0 |
Zr + Hf | Balance (≥ 95.5% class) |
Hf | ≤ 4.5 |
Fe + Cr | ≤ 0.20 |
Oxygen (O) | ≤ 0.18 (typical B551 practice) |
Table 1 — Zr705 composition per ASTM B551 (confirm limits against the contracted edition).
3. Properties vs Zr702
Property | Zr705 (R60705) | Zr702 (R60702) |
Tensile strength (min) | ≥ 552 MPa (80 ksi) | ≥ 379 MPa (55 ksi) |
Yield strength (min) | ≥ 379 MPa (55 ksi) | ≥ 207 MPa (30 ksi) |
Elongation (min) | 16% | 16% |
Density | ≈ 6.64 g/cm³ | 6.51 g/cm³ |
Strength vs Zr702 | +45% class | — |
Table 2 — Annealed minimums per ASTM B551: the niobium buys strength, not ductility loss.
Where the Strength Pays
- Stressed acid equipment — agitator components, reactor internals, fasteners in acid duty;
- Elevated-temperature corrosion service — Zr705 retains useful strength to the 200–400℃ class under inert or protective conditions;
- Desalination and brine hardware — pressure-bearing parts where pure zirconium would need a thicker section;
- Hydrometallurgy — leaching and solvent-extraction equipment in acidic media.
4. Processing and Welding
Zr705 is double VAR-melted for chemistry control and hot-worked below the transformation regime. Welding uses TIG or electron-beam under inert-gas shielding with the same hydrogen discipline as Zr702; heavy or restrained joints receive stress relief. Corrosion boundaries match the zirconium family: reducing-acid resistant, attacked by hydrofluoric and fluoride media. Custom size, condition, tolerance and documentation can be reviewed to the purchase specification.
FAQ
(1) What is the difference between Zr705 and Zr702 plate?
Zr705 adds 2–3% niobium: tensile ≥ 552 MPa vs ≥ 379 MPa (about +45%), with similar ductility — for stressed or higher-temperature acid parts. Zr702 remains the standard where corrosion, not strength, decides.
(2) Is Zr705 plate weldable?
Yes — TIG or electron-beam under inert-gas shielding with rigorous cleanliness; stress relief on heavy or restrained joints.
(3) Does Zr705 resist the same acids as Zr702?
Yes — the ZrO₂ passive film behaves the same: strong in non-fluoride reducing acids, attacked by hydrofluoric and fluoride media. The niobium changes strength, not the corrosion window.
(4) What service temperature suits Zr705?
The 200–400℃ class under inert or protective conditions; in air, oxidation limits the ceiling, so evaluate atmosphere together with temperature.
(5) Which standard governs Zr705 plate?
ASTM B551/B551M (ASME SB-551 practice for pressure equipment); GB/T 21183 covers the Chinese designation.
Related Resources and Inquiry
See the zirconium plate category or send your specification for a Zr705 plate review.
Baoji Titanium Valley Titanium Nickel Zirconium Material Processing Co., Ltd. produces zirconium foil, strip, sheet and plate per ASTM B551/B551M (R60702 / R60705) from vacuum-melted ingots on a 750 mm 20-high precision rolling line under ISO 9001 / ISO 13485. Send your specification to sales@titaniumvalleys.com — Custom size, condition, tolerance and documentation can be reviewed to the purchase specification.
5. Related Reading
- Zirconium 702 Plate: Service Review and Fabrication
- Zirconium Alloy Sheets: Grade and Condition Selection
References
1. ASTM B551/B551M, Standard Specification for Zirconium and Zirconium Alloy Strip, Sheet, and Plate.
2. ASTM E8/E8M, Standard Test Methods for Tension Testing of Metallic Materials.
3. GB/T 21183, Zirconium and Zirconium Alloy Sheet, Strip and Foil.
This article is a technical reference. It does not constitute a commercial offer; dimensions, tolerances and documentation are confirmed at order review.
Published by: Titanium Valley Technical Team. Technical and quality review: pending.